Schneider Electric TSXP67455 TSX6740 CPU Module

Schneider Electric TSXP67455 TSX6740 — Stop the Bleed: Get Your Line Back in 48 Hours

Your TSX Premium 57 rack just went dark. The TSXP67455 CPU is the brain of the entire system — without it, every I/O module, every field device, every safety interlock is deaf and blind. Every minute of unplanned downtime on a production line costs real money: idle labor, missed shipments, contractual penalties. You don’t need a sales pitch. You need a verified unit on a plane today.

We stock the Schneider Electric TSXP67455 — the high-end CPU module for the TSX6740 rack in the TSX Premium 57 platform — and we ship globally from Xiamen via DHL and FedEx Express. If you’re reading this at 2 AM because your line is down, send us a WhatsApp now: +86 18359268345. We respond around the clock for emergency sourcing.

URGENT REQUIREMENT? Contact: [email protected] | WhatsApp: +86 18359268345

Quick Technical Datasheet

Troubleshooting & Replacement Tips

Common failure signatures for the TSXP67455:

• ERR LED solid red on power-up: Typically indicates a corrupted application program or failed RAM self-test. Before condemning the CPU, attempt a cold clear (hold RUN/STOP in STOP position, cycle power) and reload the application via Unity Pro. If the ERR LED persists after a clean load, the CPU is likely failed.
• I/O bus fault (IOBUS fault on display): Can be caused by a failed CPU or a shorted I/O module on the rack. Isolate by removing all I/O modules and powering up the CPU alone. If the fault clears, reinsert modules one at a time to identify the offending card.
• Ethernet port not responding: The TSXP67455 has two independent Ethernet ports. If one port fails while the other remains active, the CPU itself may still be functional — check port-specific settings in Unity Pro under the Ethernet configuration tab before ordering a replacement.
• CPU stuck in HALT state after firmware mismatch: If a replacement TSXP67455 has a different firmware revision than the original, Unity Pro may refuse to download the application. Check the firmware version via the CPU’s front-panel display (DIAG menu → FW VER) and match it to the version recorded in your Unity Pro project properties before going live.

Replacement procedure — field checklist:

• Power down the rack via the PSY module’s circuit breaker. Do not hot-swap the CPU module — the TSX Premium 57 CPU slot does not support live replacement.
• Note the position of the RUN/STOP keyswitch before removal. Set the replacement CPU to STOP before insertion.
• If a PCMCIA memory card (e.g., TSXMFP0064P) is installed in the original CPU, transfer it to the replacement unit. The application and data blocks stored on the card will be retained.
• After insertion, power up and verify the CPU display shows “STOP” without ERR. Connect via Unity Pro, confirm the project checksum matches, then switch to RUN.
• Verify all Ethernet IP addresses are correctly assigned — the replacement CPU will default to factory IP settings (typically 85.16.0.1) and must be reconfigured to match your network topology before going online.
• Check the rack’s I/O addressing: the TSX Premium 57 uses automatic rack addressing based on physical slot position. No DIP switch configuration is required on the CPU itself, but verify that any remote I/O drops (via TSXETY or TSXSCP modules) are correctly mapped in the Unity Pro configuration.

Reliability in Harsh Conditions

The TSX Premium 57 platform was engineered for continuous 24/7 operation in environments that would destroy consumer-grade electronics. The TSXP67455 CPU module is built to the same standard:

• Vibration resistance: Designed to IEC 60068-2-6 sinusoidal vibration profiles — relevant for installations near heavy presses, compressors, or rotating machinery where panel vibration is a constant stress factor.
• Thermal cycling tolerance: Rated for 0°C to +60°C continuous operation with internal thermal management. In practice, units have been recovered from plant environments running at sustained 55°C ambient without derating.
• EMC immunity: Compliant with IEC 61000-4 series for conducted and radiated immunity. The dual-layer PCB shielding and filtered backplane connector make the TSXP67455 resistant to the high-frequency noise generated by VFDs and servo drives sharing the same panel.
• Humidity tolerance: Rated to 95% relative humidity non-condensing. Units sourced from decommissioned plants in tropical climates have been successfully refurbished and returned to service after thorough inspection and cleaning.
• Conformal coating (select batches): Some production runs of the TSXP67455 include conformal coating on the PCB, providing additional protection against condensation and corrosive atmospheres. Inspect the board edge label for the “CC” suffix to confirm coating status on your specific unit.

Global Express Logistics

We operate from Xiamen, China — one of the most logistics-connected export hubs in Asia, with direct DHL and FedEx Express lanes to major industrial centers worldwide. Here’s what happens after you confirm your order:

• Same-day dispatch: Orders confirmed before 15:00 CST are packed and handed to the carrier the same business day. ESD-safe anti-static bag, foam-lined carton, and tamper-evident sealing as standard.
• DHL Express / FedEx International Priority: Transit times of 2–4 business days to Europe, North America, Southeast Asia, and the Middle East. We select the carrier based on your destination and current lane performance.
• Full export documentation: Commercial invoice, packing list, and Certificate of Origin are prepared for every shipment. For destinations requiring specific import permits or HS code declarations (HS 8537.10), we coordinate in advance to prevent customs delays.
• Real-time tracking: Tracking number provided within 2 hours of dispatch. For emergency shipments, we monitor the consignment actively and flag any customs holds immediately.
• Coverage: 150+ countries. If you have a freight forwarder or bonded warehouse preference, we can ship to your nominated agent.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
© 2026 siemensplc.com. All rights reserved.