Bently Nevada 330101-00-18-10-02-05 Proximity Probe – 3300 XL Series

Bently Nevada 330101-00-18-10-02-05: Shaft Displacement Transducer for Continuous Turbomachinery Protection

The Bently Nevada 330101-00-18-10-02-05 is an 8 mm eddy-current proximity probe within the 3300 XL measurement chain, designed for non-contact, continuous monitoring of radial shaft vibration, axial position, and differential expansion on rotating machinery classified as critical or essential under API 670. The probe functions as the primary sensing element in a three-component measurement chain — probe body, extension cable, and driver/oscillator-demodulator — where each component is dimensionally and electrically matched to maintain a calibrated output scale factor of −200 mV/mil (−7.87 V/mm) across the full linear operating range.

The part number suffix 00-18-10-02-05 encodes the following configuration parameters in sequence: standard probe body (no special options), 18-inch (457 mm) armored extension cable, 10-32 UNF reverse-mount thread, connector style 02 (standard Bently Nevada coaxial), and 5-metre (16.4 ft) integral cable from probe body to field termination. This configuration is among the highest-volume proximity probe assemblies in global turbomachinery OEM packages — it appears as a standard line item in GE, Siemens Energy, MAN Energy Solutions, and Solar Turbines machinery protection specifications, and serves as a direct replacement across installed bases in petrochemical, LNG, power generation, and offshore platforms.

Real-time Stock & RFQ: [email protected] | WhatsApp: +86 18359268345

Technical Parameters

Hardware Logical Analysis

At the core of the 330101-00-18-10-02-05 is a wound coil embedded in the probe tip, driven by a high-frequency oscillator (typically 1.0–1.5 MHz carrier) housed in the paired 330180 driver unit. When the probe tip is positioned within the specified gap range of a conductive shaft, the alternating magnetic field generated by the coil induces eddy currents on the shaft surface. These eddy currents create a counter-magnetic field that loads the oscillator circuit, reducing the coil’s resonant amplitude in proportion to the probe-to-shaft gap. The driver’s demodulation stage extracts this amplitude variation and converts it to a linear DC voltage output — the measurement signal consumed by the 3500 Series monitor.

The 8 mm tip diameter is a deliberate spatial constraint. The effective sensing field diameter scales with probe tip size; a smaller tip concentrates the eddy-current induction zone, improving lateral spatial resolution for shaft orbit reconstruction. In high-speed applications above 10,000 RPM, this narrower sensing zone allows the probe to track shaft centerline displacement with sub-mil resolution without integrating displacement across a wide shaft arc — an averaging artifact that affects larger 25 mm probes at equivalent rotational speeds.

The 18-inch armored extension cable performs two distinct engineering functions. Mechanically, the stainless steel armor jacket resists crush loads and vibration-induced fatigue at cable routing points through bearing housings and machine casings. Electrically, the coaxial construction maintains the characteristic impedance of the measurement circuit between probe body and driver input, preventing signal reflections and capacitive loading that would shift the driver’s operating point and introduce a gain error in the output scale factor. The 5-metre integral cable length is matched to the nominal cable capacitance specification of the 330180 driver; substituting a non-standard cable length without recalibrating the driver displaces the output scale factor and invalidates the measurement chain calibration.

EMC performance is achieved through single-point shield grounding: the outer coaxial shield of both the extension cable and integral cable is grounded at the driver chassis only, eliminating ground loop currents that would appear as low-frequency interference on the DC output signal. In high-EMI environments — VFD motor rooms, high-voltage switchgear bays, or proximity to large transformer banks — this grounding architecture provides 40–60 dB of common-mode rejection across the 50 Hz to 10 kHz band, preserving signal integrity without requiring additional shielding enclosures.

The reverse-mount 10-32 UNF thread allows the probe to be installed from the back face of a bracket, with the probe tip protruding toward the shaft. This geometry eliminates the need for a lock nut on the shaft-facing side, reducing the minimum radial clearance required for installation and enabling retrofit into OEM bearing housings with constrained internal geometry.

System Integration Benefits

• API 670 Fifth Edition compliance without additional qualification: The 330101-00-18-10-02-05 satisfies the transducer performance requirements of API 670 as a complete measurement chain element, allowing direct specification in machinery protection system datasheets by EPC contractors and end-user instrument engineers without supplementary testing.
• Zero-recalibration replacement: The matched output scale factor and cable capacitance mean that replacing a failed probe with an identical 330101-00-18-10-02-05 does not require re-ranging or re-zeroing the 3500 Series monitor channel — maintenance downtime is bounded by the physical swap and gap-setting procedure only.
• Sub-millisecond signal latency for trip-speed protection: The eddy-current measurement chain introduces no mechanical hysteresis or contact wear, delivering consistent response to shaft displacement events within one shaft revolution — a hard requirement for machinery protection systems where trip response time is specified in milliseconds.
• Full shaft orbit reconstruction in X-Y pairs: Two 330101 probes installed at 90° (or 45° from vertical) provide the orthogonal displacement vectors required for shaft orbit analysis in Bently Nevada System 1 or equivalent condition monitoring platforms, enabling bearing wear trending, rotor dynamic diagnostics, and rub detection.
• Continuous in-situ gap verification via 3500 monitor diagnostics: The 3500/42M and 3500/46M monitor modules support gap voltage monitoring on each proximity probe channel, providing real-time confirmation that the probe remains within its linear range during operation — eliminating the need for periodic manual gap checks during planned maintenance windows.
• Thermal coverage for steam turbine bearing environments: The probe body rating to +177°C covers the ambient temperature range of the majority of steam turbine bearing housings (typically 80–150°C), while the +121°C cable rating accommodates routing through moderately heated machine casings without supplementary thermal insulation.
• Compact installation envelope for retrofit applications: The 8 mm tip diameter and reverse-mount thread geometry allow installation in bearing housings with radial clearances as small as 12 mm, enabling proximity probe monitoring to be added to OEM machine frames not originally designed for continuous vibration measurement.
• Backward compatibility with 3300 Series (non-XL) infrastructure: The 330101 probe is electrically compatible with earlier 3300 Series drivers configured for 8 mm probe input, protecting existing field wiring, junction boxes, and conduit runs during phased system upgrades from legacy 3300 to 3300 XL or 3500 Series architectures.
• Deterministic measurement chain traceability: Each 330101-00-18-10-02-05 unit is manufactured to a fixed calibration standard, allowing the complete measurement chain (probe + extension + driver) to be documented with a single calibration certificate — simplifying instrument loop documentation for HAZOP, SIL assessment, and functional safety audits.

Quality Assurance & Global Logistics

Every Bently Nevada 330101-00-18-10-02-05 unit dispatched from our Xiamen, China facility is subject to a structured pre-shipment inspection protocol before release. Physical inspection covers probe tip surface condition, extension cable armor continuity, connector pin geometry and seating, and cable jacket integrity along the full 5-metre length. Part number markings, date codes, and OEM labels are cross-referenced against Bently Nevada manufacturer documentation to confirm part authenticity and configuration accuracy. Units are packaged in anti-static, moisture-barrier inner bags with foam-cushioned outer cartons rated for international air freight handling per ISTA 2A drop and vibration profiles.

Shipment from Xiamen is available via DHL Express (3–5 business days to Europe, Middle East, and Southeast Asia), FedEx International Priority, and consolidated sea freight for volume orders. Full export documentation — commercial invoice, packing list, and certificate of conformance — is prepared for every shipment. Country-specific import documentation, including EUR.1 movement certificates and FORM E for ASEAN preferential tariff treatment, is available upon request. All units carry a 12-month warranty from the date of shipment, covering manufacturing defects and verified deviations from the published performance specification.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.