Bently Nevada 330104-00-07-50-02-00 Proximity Probe – 3300 XL Series

Bently Nevada 330104-00-07-50-02-00: Eddy-Current Displacement Measurement in Rotating Machinery Control Loops

The Bently Nevada 330104-00-07-50-02-00 is an 8 mm eddy-current proximity probe from the 3300 XL Series, engineered for continuous, non-contact measurement of radial shaft displacement in high-speed rotating machinery. Within a closed-loop condition monitoring architecture, this probe functions as the primary sensing element: it converts the physical gap between the probe tip and a conductive target surface into a proportional DC voltage signal, which is then processed by a paired 3300 XL proximitor/extension cable assembly to deliver real-time vibration amplitude and DC gap data to the monitoring system. The probe’s role is deterministic — any deviation in its output directly affects alarm setpoints, trip thresholds, and machinery protection decisions. Selecting a probe with verified linearity, stable sensitivity, and certified EMC performance is therefore not a preference but an engineering requirement.

The 330104-00-07-50-02-00 configuration encodes specific mechanical and electrical parameters: 8 mm probe diameter, 7.62 m (25 ft) integral cable, standard -02-00 connector termination, and factory-calibrated sensitivity of 7.87 V/mm (200 mV/mil). This calibration is performed against a 4140 steel target at the Bently Nevada factory, ensuring the probe’s output curve is traceable and repeatable across its full linear measurement range of 0.25 mm to 2.54 mm (10 to 100 mil). The probe is rated for continuous operation from -35°C to +177°C, making it suitable for bearing housings, compressor casings, and turbine pedestals where ambient temperatures are elevated and thermal gradients are steep.

In a typical API 670-compliant machinery protection system, this probe is installed radially at 90° X-Y orientation on the bearing journal, with the proximitor mounted in a local junction box within 0.5 m of the probe. The DC gap voltage is monitored continuously; a shift beyond ±10% of the nominal gap voltage indicates probe system fault, target runout anomaly, or shaft centerline migration — all of which are actionable diagnostic signals. The 330104-00-07-50-02-00 is fully compatible with the Bently Nevada 3300 XL proximitor series (part numbers 330180, 330130) and integrates directly into System 1 condition monitoring software via standard 4–20 mA or direct voltage output from the monitor rack.

Real-time Stock & RFQ: [email protected] | WhatsApp: +86 18359268345

Technical Parameters

Hardware Logical Analysis

The 330104-00-07-50-02-00 operates on the principle of electromagnetic induction: the probe tip contains a wound coil driven by a high-frequency oscillator (typically 1.0 MHz) housed within the proximitor. When the probe tip approaches a conductive target, eddy currents are induced on the target surface, loading the oscillator circuit and reducing the coil’s effective impedance. This impedance change is demodulated into a DC voltage output with a slope of 7.87 V/mm across the calibrated linear range.

EMC and Shielding Architecture: The integral cable uses a triaxial construction — inner conductor, inner shield (driven at the same potential as the center conductor to eliminate cable capacitance effects), and outer shield connected to system ground. This driven-shield (guard) topology suppresses capacitive coupling from adjacent high-voltage cables and reduces susceptibility to radiated RF interference in switchgear-dense environments. The probe body’s 316 stainless steel housing provides additional magnetic shielding and mechanical protection against hydraulic fluid ingress (IP67-equivalent sealing at the cable entry point).

Thermal Stability: The coil winding uses a temperature-compensated formulation that maintains sensitivity within ±0.5% across the full -35°C to +177°C operating range. This is critical in steam turbine applications where bearing housing temperatures can cycle between ambient and 150°C during startup and shutdown sequences. Without thermal compensation, sensitivity drift would introduce systematic error into vibration amplitude readings, potentially masking early-stage bearing wear signatures.

Mechanical Robustness: The M10 x 1.0 threaded body allows precise gap setting with a standard locknut arrangement. The 316 SS housing resists corrosion from lubricating oil additives, process gas condensates, and cleaning solvents. The armored cable jacket is rated for continuous flexure in installations where the cable must route through vibrating structures without fatigue failure at the cable-to-probe junction.

System Integration Benefits

• Direct API 670 Compliance: The probe meets the electrical and mechanical requirements of API Standard 670 (5th Edition) for machinery protection systems, eliminating the need for additional qualification testing during plant commissioning audits.
• Plug-and-Play Compatibility with 3300 XL Proximitors: Factory-matched sensitivity (7.87 V/mm) ensures the probe-proximitor pair operates within the calibrated system curve without field recalibration, reducing commissioning time by eliminating manual sensitivity verification steps.
• Deterministic Gap Voltage Output: The linear DC output allows direct threshold configuration in Bently Nevada 3500 series monitors and third-party DCS/SIS systems via standard analog input cards, with no signal conditioning required beyond the proximitor output.
• High-Frequency Response for Subsynchronous Detection: The 1.0 MHz carrier frequency supports measurement bandwidths sufficient to resolve subsynchronous vibration components (e.g., oil whirl at 0.43–0.48× running speed) that are diagnostic indicators of bearing instability in fluid-film bearing machines.
• Fault-Transparent Probe System Diagnostics: A broken cable or open-circuit condition drives the proximitor output to the negative rail (below -18 VDC), which is outside the normal measurement range and is interpreted by the monitor as a probe fault — providing unambiguous diagnostic transparency without requiring additional fault detection circuitry.
• Reduced Installation Variability: The integral cable eliminates the extension cable connector junction between probe and proximitor, removing a potential source of impedance mismatch and intermittent contact resistance that can introduce noise into the measurement chain.
• Broad Target Material Compatibility: While factory-calibrated on 4140 steel, the probe can be field-recalibrated for alternative target materials (e.g., 17-4 PH stainless, Inconel 718) using the Bently Nevada TK-3 calibration kit, supporting retrofits on non-standard shaft materials in petrochemical and aerospace applications.
• Long-Term Measurement Stability: The absence of moving parts and the non-contact measurement principle result in a mean time between failure (MTBF) exceeding 100,000 hours in typical industrial environments, supporting continuous operation between scheduled turnaround maintenance intervals of 3–5 years.

Quality Assurance & Global Logistics

Each 330104-00-07-50-02-00 unit supplied by siemensplc.com is sourced as genuine Bently Nevada OEM hardware. Prior to dispatch, every probe assembly undergoes a four-stage verification protocol: (1) visual inspection of the probe body, cable jacket, and connector for mechanical damage; (2) coil continuity and insulation resistance measurement to confirm cable integrity; (3) sensitivity verification using a calibrated gap-setting fixture against a 4140 steel target; and (4) documentation review to confirm part number, date code, and traceability records match the physical unit.

Inventory is held at our Xiamen, China facility, positioned for efficient access to major international freight hubs including Xiamen Gaoqi International Airport (XMN) and Xiamen Port. Standard export documentation — commercial invoice, packing list, certificate of origin, and material safety data sheet — is prepared for all international shipments. DHL Express, FedEx International Priority, and UPS Worldwide Express services are available for time-critical orders, with typical transit times of 3–5 business days to North America and Europe. Sea freight consolidation is available for bulk orders. All units are packed in anti-static foam-lined cartons with desiccant to prevent moisture ingress during transit.

A 12-month warranty covers manufacturing defects and verified calibration drift beyond factory tolerance. Warranty claims are processed with a target response time of 48 hours from receipt of the defective unit.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.