Schneider Electric BMXP341000 PLC CPU Module – Modicon M340

Schneider Electric BMXP341000 — Modicon M340 CPU Processor Module with Integrated Ethernet Modbus TCP/IP

The Schneider Electric BMXP341000 is the entry-level CPU processor for the Modicon M340 mid-range programmable logic controller platform. Positioned at the intersection of compact form factor and deterministic real-time control, this module serves as the computational core of M340-based control architectures deployed across discrete manufacturing, process automation, building management, and infrastructure sectors. Its integrated dual-port communication architecture — combining a 10/100 Mbps Ethernet Modbus TCP/IP port with an RS-485 Modbus serial port — eliminates the need for supplementary communication modules in the majority of field installations, directly reducing rack slot consumption and overall system BOM cost.

Unlike general-purpose embedded controllers, the BMXP341000 is engineered around a deterministic execution model. The processor executes IEC 61131-3 application programs with a boolean instruction throughput of 0.1 ms per 1,000 instructions, delivering scan-cycle predictability that is mandatory in closed-loop control applications such as PID regulation, motion sequencing, and safety-adjacent interlocking. The module draws power directly from the M340 backplane (BMX XBP rack), maintaining a clean separation between field-side power domains and logic-side supply, which is a fundamental requirement in EMC-sensitive industrial environments.

Real-time Stock & RFQ: [email protected] | WhatsApp: +86 18359268345

Technical Parameters

Hardware Logical Analysis

The BMXP341000 is built on a backplane-bus architecture native to the M340 platform. The BMX XBP rack provides a high-speed internal bus that interconnects the CPU with all installed I/O and communication modules. Data exchange between the processor and local I/O modules occurs over this backplane at cycle-synchronous intervals, meaning I/O image refresh is tightly coupled to the task scheduler — a design that eliminates the asynchronous latency inherent in distributed I/O architectures when determinism is the primary constraint.

Dual-port communication without external modules: The on-board Ethernet port operates independently from the serial RS-485 port at the hardware level. Both ports are managed by dedicated communication co-processors, offloading protocol stack execution from the main application CPU. This architecture ensures that heavy Modbus TCP/IP polling traffic from a SCADA system does not introduce jitter into the PLC scan cycle — a critical distinction from single-core designs where communication and application tasks compete for the same execution context.

EMC design posture: The M340 platform, including the BMXP341000, is designed to IEC 61000-4 series immunity standards. The backplane bus uses differential signaling with controlled impedance traces, and the module’s PCB incorporates ground plane segmentation to isolate high-frequency switching noise from analog and communication signal paths. The RS-485 serial interface includes built-in transient voltage suppression (TVS) protection, rated to withstand ±15 kV ESD events per IEC 61000-4-2, which is essential in environments with frequent cable connect/disconnect operations.

Memory architecture: The 512 KB application memory is implemented as battery-backed SRAM, preserving the application program and retain data variables through power loss without requiring an external memory card for basic operation. This is a significant operational advantage in field installations where maintenance access is infrequent and unplanned power interruptions are a routine occurrence.

Task scheduler: The BMXP341000 supports a multi-task execution model with a master task (MAST), fast task (FAST), and event-driven tasks (EVT). The FAST task can be configured with a period as low as 1 ms, enabling high-frequency control loops — such as motor speed regulation or pressure control — to execute independently of slower background tasks handling HMI communication or data logging. This task isolation is enforced at the firmware level, not merely by software priority, ensuring that a communication timeout in the MAST task cannot delay FAST task execution.

System Integration Benefits

• Zero-slot communication overhead: The integrated Ethernet and serial ports consume no rack slots, preserving all available positions for I/O expansion — a direct cost and space advantage over CPU modules requiring separate communication modules.
• Deterministic scan-cycle execution: Boolean throughput of 0.1 ms/1,000 instructions with configurable watchdog timers ensures that application programs meet real-time deadlines in closed-loop control scenarios.
• Dual-protocol field connectivity: Simultaneous Modbus TCP/IP and Modbus RTU operation allows the BMXP341000 to serve as a protocol bridge between legacy serial field devices and modern Ethernet-based SCADA or DCS systems without additional gateway hardware.
• IEC 61131-3 multi-language programming: Full support for Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST), Instruction List (IL), and Sequential Function Chart (SFC) within a single project, enabling engineers to select the most appropriate language for each program section.
• Online modification capability: EcoStruxure Control Expert supports online program modification without stopping the PLC, allowing engineers to adjust logic, add rungs, or modify data blocks while the system remains in production — minimizing unplanned downtime during commissioning and maintenance.
• Integrated diagnostics transparency: The module exposes detailed diagnostic information — including task overrun counters, communication error registers, and I/O module status — via system words (%SW) and system bits (%S) accessible from the application program, enabling self-diagnostic logic without external instrumentation.
• Scalable rack configuration: Compatible with 4, 6, 8, and 12-slot BMX XBP racks, the BMXP341000 supports system scaling from compact standalone machines to multi-rack distributed I/O architectures using BMX XBE extension racks, all managed from a single CPU.
• EtherNet/IP scanner capability: Beyond Modbus TCP/IP, the Ethernet port supports EtherNet/IP explicit messaging, enabling integration with Allen-Bradley and other EtherNet/IP-compatible devices in mixed-vendor automation environments without additional adapter modules.
• Battery-backed data retention: Retain-type data variables and the application program are preserved in battery-backed SRAM, ensuring that the system resumes from its last known state following a power interruption — a requirement in continuous process applications where cold-start initialization is operationally unacceptable.
• Firmware upgrade path: The BMXP341000 supports in-field firmware updates via the Ethernet port using EcoStruxure Control Expert, eliminating the need to physically remove the module from the rack for maintenance firmware revisions.

Quality Assurance & Global Logistics

Every Schneider Electric BMXP341000 unit supplied by siemensplc.com is sourced through verified supply channels and undergoes a structured pre-shipment inspection protocol before dispatch from our warehouse in Xiamen, China.

Inspection protocol: Each unit is subjected to a power-on functional test confirming normal boot sequence and communication port activity, firmware version verification against the Schneider Electric release matrix, visual inspection of connector pins, label integrity, and housing condition, and anti-counterfeit verification including holographic label authentication and serial number cross-reference where applicable.

Packaging: Modules are shipped in original or equivalent ESD-protective packaging with desiccant inserts, enclosed in double-wall corrugated cartons rated for international air and sea freight handling. Fragile and electrostatic-sensitive markings are applied to all outer cartons.

Logistics coverage: We ship globally from Xiamen via DHL Express, FedEx International Priority, and UPS Worldwide Expedited. Standard transit times are 3–5 business days to Europe and North America, 2–4 business days to Southeast Asia and the Middle East. Sea freight consolidation is available for bulk orders. All shipments include commercial invoice, packing list, and certificate of origin. Export classification: HS Code 8537.10.

Warranty: All units carry a 12-month warranty from the date of shipment, covering functional defects under normal operating conditions. Warranty claims are processed with a target response time of 48 hours. Advance replacement service is available for critical production environments upon request.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.