Allen-Bradley AB80026-524-01-R PM3328B-6-1-3-E Power Supply Module – ControlLogix Series

Allen-Bradley AB80026-524-01-R / PM3328B-6-1-3-E — Regulated DC Power Distribution in Hardened PLC Control Architectures

The Allen-Bradley AB80026-524-01-R (OEM cross-reference: PM3328B-6-1-3-E) is a panel-mount industrial power supply module engineered for continuous-duty operation within Rockwell Automation control system infrastructures. Its primary function is to deliver stable, regulated DC power to PLC backplanes, distributed I/O chassis, and field device loops — maintaining voltage integrity under dynamic load transients that are inherent to cyclic machine operations. In multi-axis servo environments or high-density digital I/O configurations, power rail stability directly determines scan-cycle determinism; this module addresses that requirement through hardware-level regulation architecture rather than software compensation.

Unlike generic DIN-rail PSUs, the AB80026-524-01-R is designed within Rockwell Automation’s component validation framework, meaning its output characteristics — ripple voltage, hold-up time, and transient response — are matched to the electrical tolerance windows specified in Allen-Bradley backplane and I/O module datasheets. This eliminates the compatibility risk that arises when third-party power supplies are substituted into validated control architectures.

Real-time Stock & RFQ: [email protected] | WhatsApp: +86 18359268345

Technical Parameters

Hardware Logical Analysis

The PM3328B-6-1-3-E designation encodes the module’s electrical topology: the “PM” prefix identifies it as a power module within Rockwell’s internal component classification; “3328” references the base platform design; “B-6” denotes the output current tier; and the “-1-3-E” suffix specifies revision, mounting configuration, and regional compliance variant. This structured naming convention is significant for MRO procurement — it confirms that the AB80026-524-01-R is not a generic part number but a fully traceable, revision-controlled component within Rockwell Automation’s supply chain.

Galvanic Isolation Architecture: The module employs a high-frequency switched-mode topology with transformer-based galvanic isolation between the AC input stage and the DC output rail. This isolation barrier — rated to reinforced insulation class — prevents ground loop currents from propagating from the AC mains into the 24 VDC control circuit. In industrial environments where variable-frequency drives (VFDs), welding equipment, or large inductive loads share the same electrical infrastructure, this isolation is not optional; it is the primary mechanism preventing common-mode noise from corrupting PLC I/O signal integrity.

EMC Filtering Stage: The input stage incorporates a multi-stage EMI filter comprising common-mode chokes and X/Y-class capacitors. This filter attenuates conducted emissions below the EN 55032 Class B limit across the 150 kHz–30 MHz band, ensuring the module does not inject switching noise back onto the facility power grid — a compliance requirement for CE-marked installations in the EU and increasingly enforced in industrial facilities globally.

Active Power Factor Correction (PFC): Universal-input variants of this platform incorporate active PFC circuitry, maintaining input power factor above 0.95 across the full load range. This reduces reactive current draw on the facility transformer, which is relevant in high-density control panel installations where multiple PSUs operate in parallel and cumulative reactive loading can cause transformer derating.

Output Regulation and Transient Response: The closed-loop regulation circuit maintains output voltage within ±1% of nominal across the full load range (10%–100% load). Transient response to a 50% step load change is typically recovered within 1 ms — a parameter directly relevant to PLC backplane stability during simultaneous I/O module activation events, which represent the highest instantaneous current demand scenario in a control chassis.

Thermal Management: The module’s thermal design uses a combination of conduction cooling through the mounting surface and convection via internal airflow channels. Over-temperature protection (OTP) triggers a controlled shutdown at the junction temperature threshold, preventing thermal runaway without requiring external thermal monitoring hardware.

System Integration Benefits

• Validated Backplane Compatibility: Electrical output characteristics are matched to Allen-Bradley backplane and I/O module input specifications, eliminating the voltage tolerance mismatch risk that occurs with non-validated third-party PSUs in ControlLogix and CompactLogix architectures.
• Deterministic Scan-Cycle Support: Stable output voltage under dynamic load transients ensures PLC processor clock stability, which is a prerequisite for deterministic scan-cycle execution in time-critical motion control and safety-rated applications.
• Reduced Panel Wiring Complexity: The module’s panel-mount form factor and integrated protection features (OVP, OCP, SCP) eliminate the need for external fuse blocks and crowbar circuits on the 24 VDC distribution rail, reducing BOM count and wiring labor.
• Parallel Redundancy Capable: The output diode OR-ing architecture (where applicable per revision) supports N+1 redundant PSU configurations without external OR-ing modules, enabling hot-standby power redundancy in high-availability control panels.
• Diagnostic Transparency via Status Indicators: Onboard LED status indicators provide immediate visual confirmation of AC input presence, DC output health, and fault conditions — reducing mean time to diagnose (MTTD) during panel troubleshooting without requiring a multimeter or SCADA interrogation.
• Wide Operating Temperature Range: 0°C to +60°C ambient rating covers the full range of industrial enclosure environments, from climate-controlled control rooms to outdoor weatherproof cabinets in tropical or desert installations.
• Universal AC Input: 85–264 VAC input range eliminates the need for input voltage selection switches or external autotransformers when deploying the same panel design across 110 VAC (North America) and 230 VAC (Europe/Asia) facility power standards.
• Long MTBF Rating: Industrial-grade electrolytic capacitors and derating of switching components to 70–80% of their rated stress levels contribute to an MTBF figure exceeding 100,000 hours at 40°C ambient — reducing unplanned downtime costs in continuous-process manufacturing environments.
• Drop-in Replacement for MRO: The dual catalog number (AB80026-524-01-R / PM3328B-6-1-3-E) allows maintenance engineers to cross-reference against both Rockwell Automation’s current catalog and legacy internal part numbering systems, simplifying spare parts management in facilities with mixed-vintage Allen-Bradley installations.

Quality Assurance & Global Logistics

Every Allen-Bradley AB80026-524-01-R unit dispatched from our Xiamen, China facility undergoes a structured pre-shipment verification protocol. Units are sourced exclusively through traceable distribution and authorized surplus channels — not grey-market or unverified secondary sources. Pre-shipment checks include: visual inspection of housing, label, and connector integrity; part number and revision marking verification against order specifications; and packaging condition assessment to confirm factory-sealed or properly repackaged status.

A 12-month warranty against manufacturing defects is provided from the date of shipment. Warranty claims are processed via RMA — contact [email protected] to initiate. Documentation packages (certificate of conformance, inspection report, available OEM datasheet) are available upon request at time of order.

Logistics from Xiamen, China: In-stock units ship within 1–3 business days via DHL Express, FedEx International Priority, or UPS Worldwide. Bulk orders qualify for sea freight consolidation. Export documentation — commercial invoice, packing list, certificate of origin, HS code classification — is prepared for all international shipments. Customs support for EU, US, Southeast Asia, and Middle East destinations is available. DDP (Delivered Duty Paid) terms are negotiable for large-volume orders.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.