Bently Nevada 330901-00-18-70-02-CN Proximity Transducer – 3300 XL NSv

Bently Nevada 330901-00-18-70-02-CN — Eddy-Current Proximity Transducer for Continuous Shaft Monitoring

The Bently Nevada 330901-00-18-70-02-CN is an 8 mm eddy-current proximity transducer belonging to the 3300 XL NSv (Non-Standard Voltage) Series, manufactured by Baker Hughes under the Bently Nevada brand. This transducer operates on the principle of electromagnetic induction: a high-frequency oscillating magnetic field generated at the probe tip induces eddy currents in any electrically conductive target surface. The impedance change in the probe coil is processed by a paired Proximitor® driver to produce a DC voltage output linearly proportional to the air gap between probe tip and target. The result is a non-contact, wear-free displacement signal with sub-micron resolution, suitable for continuous 24/7 machinery protection duty.

The CN suffix designates compliance with Chinese national hazardous-area certification standards (GB 3836 series), making this variant the correct selection for installations in petrochemical, LNG, and power-generation facilities operating under CNEX regulatory frameworks. The transducer integrates directly into existing 3300 XL system architectures without requiring Proximitor® recalibration, preserving installed-base investment while meeting local certification obligations.

At siemensplc.com, this unit is held in bonded stock in Xiamen, China, and is available for immediate dispatch. Each unit is individually inspected against factory dimensional and electrical tolerances before shipment. Our technical team provides pre-sales application engineering support and post-sales commissioning guidance for system integrators and end-users across Asia-Pacific, the Middle East, and Europe.

Real-time Stock & RFQ: [email protected] | WhatsApp: +86 18359268345

Technical Parameters

Hardware Logical Analysis

The 330901-00-18-70-02-CN operates within a three-component matched system: probe, extension cable, and Proximitor® driver. The matched-system architecture is not incidental — it is a deliberate design constraint that preserves the calibrated scale factor across the full operating temperature range. Each probe coil is wound to a specific inductance target, and the extension cable’s distributed capacitance is factored into the Proximitor® oscillator circuit. Substituting unmatched cables or drivers introduces a scale factor error that cannot be corrected by field calibration alone.

The NSv (Non-Standard Voltage) designation indicates that this transducer system operates at a supply rail of −24 VDC rather than the legacy −18 VDC used in earlier 3300 series hardware. The higher supply voltage increases the linear output range headroom, allowing the Proximitor® to maintain signal linearity at larger gap distances — a practical advantage in applications where shaft runout or thermal growth causes the probe gap to vary beyond the nominal 1.0 mm setpoint.

From an EMC standpoint, the probe body is constructed from 316L stainless steel with a continuous coaxial shield from tip to connector. The shield is grounded at the Proximitor® chassis, creating a Faraday enclosure around the signal conductor. This topology attenuates capacitively coupled interference from adjacent high-voltage cables — a common noise source in motor control centers and variable-frequency drive (VFD) enclosures. The CN-suffix variant additionally meets GB/T 17626 conducted and radiated emission limits, which are more stringent than CISPR 11 Class A in the 150 kHz–30 MHz band relevant to eddy-current oscillator frequencies.

The probe tip geometry — 8 mm diameter, flat-face — is optimized for shaft targets with a minimum diameter of 50 mm. Below this threshold, the curved target surface introduces a geometric sensitivity error because the eddy-current field distribution assumes a planar target. For smaller shafts, Bently Nevada specifies a correction factor that must be applied in the Proximitor® configuration. This detail is frequently overlooked during system commissioning and is a primary cause of apparent scale factor drift in small-bore pump applications.

System Integration Benefits

• Direct 3500 Series Compatibility: The 330901-00-18-70-02-CN interfaces natively with the Bently Nevada 3500/42M Proximitor®/Seismic Monitor without adapter hardware, preserving rack slot density and wiring topology in existing protection system cabinets.
• Deterministic Signal Latency: The eddy-current measurement chain introduces less than 1 ms of signal latency from physical displacement to Proximitor® output, meeting the response-time budget of API 670 5th Edition for radial vibration protection channels.
• Diagnostic Transparency via System 1®: When paired with Bently Nevada System 1® software, the transducer’s gap voltage is logged continuously, enabling trend analysis of probe gap drift — an early indicator of bearing wear or shaft thermal bow — without interrupting the protection function.
• Hazardous-Area Dual Certification: ATEX + CN (GB 3836) dual certification eliminates the need for separate instrument variants in facilities that operate under both European and Chinese regulatory frameworks, reducing spare-parts SKU proliferation.
• Zero Mechanical Wear: Non-contact measurement eliminates the tribological degradation mechanisms that affect contact-type sensors, making the 330901-00-18-70-02-CN suitable for continuous monitoring duty cycles exceeding 100,000 operating hours without scheduled replacement.
• Thermal Stability: The probe’s temperature coefficient of sensitivity is specified at ±0.05 V/mm per 100 °C, ensuring that thermal transients during turbine startup and shutdown do not produce false vibration alarms in the protection system.
• Matched-System Traceability: Each probe, cable, and Proximitor® set carries a matched serial number traceable to factory calibration records, supporting IEC 61511 functional safety documentation requirements for SIL-rated protection loops.
• Reduced Commissioning Time: Factory-calibrated scale factor eliminates field calibration of the measurement chain; commissioning is reduced to gap-setting verification and loop check, typically achievable within 30 minutes per channel by a qualified instrument technician.

Quality Assurance & Global Logistics

Every Bently Nevada 330901-00-18-70-02-CN unit stocked at siemensplc.com is sourced through verified supply channels and undergoes a structured incoming inspection protocol before entering bonded inventory. Inspection criteria include: label and serial number authentication against Baker Hughes factory records, coaxial connector pin geometry and gold-plating condition, probe body thread integrity (M10×1.0 standard thread), cable sheath continuity and outer jacket condition, and coil resistance measurement within ±5% of the factory nominal value.

Units that pass inspection are individually anti-static bagged, placed in foam-lined cartons, and sealed with a siemensplc.com QC label bearing the inspection date and technician ID. Export documentation — commercial invoice, packing list, and certificate of origin — is prepared for every international shipment. HS Code 9031.80 is applied for customs classification, and our logistics team provides pre-clearance documentation support for destinations with complex import procedures, including India, Brazil, and Saudi Arabia.

Standard dispatch from our Xiamen, China warehouse is 1–3 business days for in-stock units. Air freight to major industrial hubs — Singapore, Dubai, Rotterdam, Houston — typically achieves door-to-door transit of 3–5 business days. For plant shutdown emergencies, same-day dispatch is available for orders confirmed before 14:00 CST. All shipments are tracked end-to-end, with tracking numbers provided within 24 hours of dispatch.

Contact Information

📧 Email: [email protected]
💬 WhatsApp: +86 18359268345
🌐 Web: siemensplc.com
📍 Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.