SICK WL11-2P2432P07 Photoelectric Sensor – W11 Series

SICK WL11-2P2432P07 — Compact Diffuse Photoelectric Sensor for High-Cycle Industrial Detection

The SICK WL11-2P2432P07 is a miniaturized diffuse-reflection photoelectric sensor belonging to the W11 platform — a product line engineered specifically for space-constrained machine frames where standard-body sensors cannot be accommodated without structural modification. Operating on a 10–30 V DC supply rail, the device delivers a PNP push-pull switching output with a response time of ≤ 0.5 ms and a switching frequency ceiling of 1,000 Hz, making it a viable choice for high-throughput counting, positioning, and presence-detection tasks across packaging, automotive assembly, and material handling infrastructure.

Unlike generic proximity devices, the WL11-2P2432P07 integrates a 660 nm red LED emitter — a wavelength selected for its balance between ambient light immunity and target contrast on matte industrial surfaces. The visible alignment beam eliminates the need for external alignment tools during commissioning, reducing installation labor on multi-sensor machine frames. The sensor’s thermoplastic PBT housing achieves IP67 ingress protection, qualifying it for coolant splash environments and periodic high-pressure wash-down cycles without additional enclosure investment.

Real-time Stock & RFQ: [email protected] | WhatsApp: +86 18359268345

Technical Parameters

Hardware Logical Analysis

The WL11-2P2432P07 implements a three-stage signal processing chain within its compact PBT enclosure. The 660 nm red LED emitter is driven by a modulated current source — typically pulsed at frequencies well above ambient fluorescent interference bands — so that the receiver’s bandpass filter can discriminate the sensor’s own reflected signal from background illumination artifacts. This modulation-demodulation architecture is the primary mechanism by which the W11 platform achieves ambient light immunity up to 5,000 lux of incandescent and fluorescent interference without requiring external shielding.

The receiver photodiode feeds into a transimpedance amplifier stage, converting photocurrent to a voltage proportional to reflected energy. A threshold comparator with adjustable hysteresis determines the switching point; the hysteresis band prevents output chatter when the target edge passes through the beam boundary at low velocity — a common failure mode in fixed-threshold designs operating near the sensing range limit.

EMC robustness is addressed at the hardware level through a combination of ferrite bead filtering on the supply line, a transient voltage suppressor (TVS) diode across the V+ and GND rails rated for ±1 kV surge per IEC 61000-4-5, and a shielded cable interface at the M8 connector. The PNP push-pull output stage uses back-to-back MOSFETs, eliminating the forward voltage drop associated with bipolar transistor outputs and maintaining output HIGH voltage within 1.5 V of supply — a measurable advantage when interfacing with PLC digital input modules that specify a minimum HIGH threshold of 15 V on a 24 V DC rail.

The Light-ON / Dark-ON programmable logic is implemented via a dedicated input pin (Pin 2) rather than a mechanical switch, allowing the operating mode to be set by the control system’s I/O configuration without physical access to the sensor body — a practical advantage in sealed machine enclosures where sensor access requires tooling or safety interlocks.

System Integration Benefits

• Direct PLC DI compatibility: PNP sourcing output interfaces natively with Siemens S7-1200/1500, Mitsubishi iQ-R, Omron NX, and Rockwell 1769 digital input modules without interposing relays or signal converters, reducing panel wiring complexity and potential failure points.
• Wide voltage tolerance eliminates regulation overhead: The 10–30 V DC operating range spans both 12 V and 24 V DC bus architectures, allowing a single sensor SKU to serve mixed-voltage machine platforms without separate part numbers or voltage regulators.
• Sub-millisecond response supports deterministic scan cycles: At ≤ 0.5 ms response time, the sensor’s output transition is resolved within a single 1 ms PLC scan cycle, ensuring that object detection events are captured without scan-cycle aliasing in high-speed conveyor applications.
• 1,000 Hz switching frequency enables pulse counting: The sensor can function as a direct encoder substitute for low-resolution shaft counting or product counting on conveyor lines, reducing BOM cost by eliminating a dedicated incremental encoder in applications where ≤ 1,000 pulses/second resolution is sufficient.
• IP67 sealing reduces maintenance intervals: Dust-tight and temporary-immersion-rated construction eliminates the need for periodic sensor cleaning or replacement in wash-down environments, lowering lifecycle maintenance cost compared to non-rated alternatives.
• Visible 660 nm alignment beam reduces commissioning time: Technicians can verify beam alignment and sensing range visually during installation without oscilloscope or signal analyzer, cutting per-sensor commissioning time by an estimated 3–5 minutes on multi-sensor machine frames.
• Extended -40 °C lower temperature limit: Qualifies the sensor for cold-chain logistics equipment, outdoor-adjacent installations, and unheated warehouse environments without auxiliary heating elements or thermal enclosures.
• Short-circuit protected output preserves PLC I/O integrity: Internal current limiting on the switching output prevents PLC digital input module damage during wiring faults or accidental output-to-ground shorts, reducing unplanned downtime from I/O card replacement.

Quality Assurance & Global Logistics

Every SICK WL11-2P2432P07 unit dispatched from our Xiamen, China facility is sourced through verified supply channels with full batch traceability. SICK AG date codes and serial numbers are preserved intact on each unit. Pre-shipment inspection covers housing integrity, M8 connector pin condition, label legibility, and — on request for orders of five or more units — functional output verification against a calibrated 24 V DC test bench.

Documentation available upon request includes the SICK original product datasheet, certificate of conformity, and packing list with individual serial numbers. For regulated industries (automotive Tier 1, medical device assembly), a material declaration and RoHS compliance statement can be provided.

Logistics from Xiamen are handled via DHL Express (2–4 business days to most destinations), FedEx International Priority, or consolidated sea freight for volume orders. Export documentation — commercial invoice, packing list, and HS code declaration (8543.70 or applicable) — is prepared in compliance with Chinese customs regulations and destination-country import requirements. Standard dispatch lead time is 2–5 business days from payment confirmation. Tracking numbers are issued at the point of carrier handover.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.