Bently Nevada 330103-02-04-30-01-00 Proximity Probe – 3300 XL Series

Bently Nevada 330103-02-04-30-01-00 — 8mm Eddy Current Proximity Probe in the 3300 XL Transducer Architecture

The 330103-02-04-30-01-00 is an 8mm diameter, non-contacting eddy current proximity probe manufactured by Bently Nevada (a Baker Hughes company) as the primary sensing element of the 3300 XL transducer platform. In a continuous rotating machinery protection loop, this probe functions as the physical interface between the mechanical domain and the electronic measurement chain. It converts air-gap displacement into a modulated high-frequency carrier signal, which the downstream proximitor demodulates into a calibrated DC voltage proportional to shaft position. The probe is the only component in the transducer chain that operates inside the machine casing, making its mechanical integrity, thermal stability, and electromagnetic linearity the foundational variables for measurement accuracy across the entire protection system.

Deployed globally on steam turbines, gas turbines, centrifugal compressors, and large motor-driven pumps, the 3300 XL probe series is the reference standard cited in API 670 5th Edition for machinery protection instrumentation. The 330103-02-04-30-01-00 part number encodes specific configuration parameters: 8mm probe body diameter, 0.9 m integral armored cable, and a 3-pin MIL-C-5015 style connector — a configuration optimized for installations where the probe-to-proximitor cable run is completed by a separately ordered 330130-series extension cable to achieve a total system length of 5 m or 9 m.

Real-time Stock & RFQ: [email protected] | WhatsApp: +86 18359268345

Technical Parameters

Hardware Logical Analysis

The eddy current sensing mechanism in the 330103-02-04-30-01-00 operates on the Lenz’s law induction principle. An oscillator circuit within the proximitor drives a high-frequency AC current — typically in the 1 MHz range — through the probe coil wound at the tip. This energized coil projects an electromagnetic field perpendicular to the probe face. When a conductive target (the rotating shaft) enters this field, circulating eddy currents are induced on the shaft surface. These eddy currents generate a counter-magnetic field that partially opposes the probe’s primary field, loading the oscillator circuit and reducing its amplitude. The magnitude of this amplitude reduction is a monotonic, near-linear function of the air gap distance within the calibrated range of 0.25 mm to 2.25 mm.

The 8mm probe body diameter is a deliberate mechanical and electromagnetic design choice. A larger coil diameter increases the effective sensing area, which extends the linear range and reduces sensitivity to minor probe-to-shaft angular misalignment — a practical advantage in field installations where perfect orthogonality is difficult to guarantee. The 8mm form factor also provides a favorable depth-of-field ratio: the electromagnetic field penetrates approximately 0.3 mm into the shaft surface at 1 MHz, which means the measurement is insensitive to surface roughness below that threshold while remaining responsive to the bulk displacement of the shaft centerline.

The stainless steel armored integral cable serves a dual function. Mechanically, it protects the coaxial signal conductor from abrasion, oil ingress, and vibration-induced fatigue at the probe body exit — the highest-stress point in the cable assembly. Electromagnetically, the armor acts as a Faraday shield, attenuating external RF interference that would otherwise modulate the carrier signal and introduce noise into the gap measurement. The cable’s characteristic impedance is matched to the proximitor input to prevent reflections that would degrade frequency response at the upper end of the 10 kHz bandwidth.

The MIL-C-5015 connector at the cable terminus provides a positive-locking, environmentally sealed interface rated for repeated mating cycles in contaminated environments. The three-pin configuration carries the oscillator drive signal, the modulated return signal, and the common ground — a separation that minimizes ground loop interference in installations where the probe and proximitor share a common chassis ground with other instrumentation.

System Integration Benefits

• Zero-wear continuous measurement: Non-contacting operation eliminates mechanical degradation of the sensing element, supporting uninterrupted 24/7 deployment on critical assets without scheduled probe replacement intervals.
• DC-coupled frequency response: The DC-to-10 kHz bandwidth captures both quasi-static shaft position (thrust, differential expansion) and dynamic vibration components including sub-synchronous instabilities, 1× and 2× running speed harmonics, and blade-pass frequencies up to 10,000 Hz.
• API 670 drop-in compatibility: The 330103-02-04-30-01-00 is a direct replacement within any existing 3300 XL transducer chain without requiring re-ranging or recalibration of the 330180 proximitor, minimizing maintenance downtime.
• Deterministic output signal: The –2 V to –18 VDC output is a hard-wired analog signal with no protocol overhead, ensuring deterministic latency from physical gap change to monitor input — a requirement for machinery protection systems where trip response time is specified in milliseconds.
• Broad thermal qualification: The –35°C to +177°C operating range covers bearing housing temperatures on high-pressure steam turbines and cold-start conditions in outdoor installations without derating the scale factor.
• Target material flexibility: While calibrated for AISI 4140 steel, the probe can be recalibrated for stainless steel, titanium, or Inconel shafts, extending applicability to aerospace-derivative gas turbines and corrosion-resistant pump shafts.
• 3500 rack integration: Direct signal compatibility with Bently Nevada 3500 series monitor cards enables plug-and-play integration into existing machinery protection panels, preserving existing alarm and trip setpoints.
• Third-party DCS/PLC compatibility: The standard analog output interfaces directly with any DCS or PLC analog input card accepting a –18 V to 0 V range, enabling integration into Siemens PCS 7, Emerson DeltaV, Honeywell Experion, and ABB 800xA systems without signal conditioning hardware.

Quality Assurance & Global Logistics

Every 330103-02-04-30-01-00 unit dispatched from our Xiamen, China facility undergoes a structured pre-shipment inspection protocol. Connector pin integrity and seating torque are verified against MIL-C-5015 acceptance criteria. Cable armor continuity and insulation resistance are measured to confirm the coaxial shield is intact from probe tip to connector. Where original OEM packaging is available, units are shipped in factory-sealed boxes with Bently Nevada part labels and date codes intact. For applications requiring formal documentation, Certificates of Conformance (CoC) and traceability records are available upon request prior to order placement.

Logistics from Xiamen are executed via DHL Express, FedEx International Priority, and UPS Worldwide Expedited, with typical transit times of 3–5 business days to Europe, 2–4 business days to Southeast Asia, and 4–6 business days to North America. All shipments include a commercial invoice, packing list, and country of origin declaration. Export classification is confirmed prior to shipment for customers in regulated jurisdictions. For B2B orders requiring T/T bank transfer, pro-forma invoices are issued within 24 hours of RFQ receipt. A 12-month warranty covers manufacturing defects under normal operating conditions, with advance replacement available for critical plant applications subject to prior arrangement.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.