Bently Nevada 330104-02-08-05-01-00 Proximity Transducer – 3300 XL

Bently Nevada 330104-02-08-05-01-00: Eddy Current Measurement at the Core of Rotating Machinery Protection

In any turbomachinery protection architecture, the proximity transducer is the first and most critical link in the measurement chain. The Bently Nevada 330104-02-08-05-01-00 is an 8 mm eddy current proximity transducer within the 3300 XL Series platform — a system that has accumulated decades of field deployment across gas turbines, steam turbines, centrifugal compressors, and high-speed pumps operating under API 670 machinery protection mandates.

This transducer does not merely detect shaft position. It continuously resolves the dynamic gap between its tip and a rotating target surface at frequencies from DC to 10,000 Hz, capturing radial vibration, axial thrust position, differential expansion, and eccentricity — all from a single non-contacting measurement point. When a journal bearing begins to fail, when a rotor develops an oil whirl instability, or when a thrust collar migrates beyond its design clearance, the 330104-02-08-05-01-00 is the instrument that generates the voltage signal that triggers a protective shutdown before catastrophic mechanical failure occurs.

The part number suffix -02-08-05-01-00 encodes specific configuration parameters: 2-metre integral cable, 8 mm tip diameter, 5-metre extension cable compatibility, standard connector type, and calibration target material (AISI 4140 steel). Each digit is a specification, not a marketing label. Ordering the wrong suffix in a replacement scenario means mismatched scale factors, incorrect linear range, and potentially invalid machinery protection coverage.

Real-time Stock & RFQ: [email protected] | WhatsApp: +86 18359268345

Technical Parameters

Hardware Logical Analysis

Eddy Current Generation & Gap-to-Voltage Conversion

The 330104-02-08-05-01-00 operates on the principle of electromagnetic induction. An oscillator circuit within the 3300 XL Proximitor drives a high-frequency alternating current through the transducer coil, generating a focused electromagnetic field at the 8 mm tip. When a conductive target enters this field, eddy currents are induced on the target surface, loading the oscillator circuit and reducing its amplitude. The Proximitor demodulation stage converts this amplitude change into a calibrated DC voltage output — linear across the 0.25 mm to 2.25 mm gap range at 7.87 V/mm.

EMC Design & Shielding Architecture

The coaxial cable construction — MIL-C-17 specification — provides continuous 360° electrostatic shielding from the transducer tip to the Proximitor input. In turbomachinery environments, the transducer cable runs adjacent to high-current motor leads, variable frequency drives, and ignition systems. Without adequate shielding, common-mode noise couples into the measurement signal and generates false vibration readings. The 3300 XL cable system maintains shield continuity through all connectors, with the shield grounded at the Proximitor end only — a single-point ground topology that eliminates ground loop currents that would otherwise appear as low-frequency noise in the output signal.

Thermal Stability & Calibration Drift

The 8 mm tip geometry is optimized for thermal mass balance. At elevated temperatures approaching the +177°C rating, the coil winding resistance increases, which would normally shift the scale factor. Bently Nevada compensates for this through matched component selection in the Proximitor oscillator circuit — the transducer and Proximitor are characterized as a system, not as independent components. This is why mixing 3300 XL transducers with non-3300 XL Proximitors invalidates the calibration and why the full part number suffix must be matched during replacement.

Target Material Sensitivity Correction

Standard calibration is performed against AISI 4140 steel. For rotors manufactured from Inconel 718, titanium alloys, or duplex stainless steel — common in high-performance compressors and aerospace-derivative turbines — the eddy current penetration depth and conductivity differ from the calibration standard. A material correction factor, published in Bently Nevada Application Note 44, must be applied to the scale factor. Failure to apply this correction introduces a systematic measurement error that can cause either nuisance trips or, more dangerously, missed alarm thresholds.

System Integration Benefits

• API 670 5th Edition Compliance: Accepted by EPC contractors and end-user specifications globally without deviation requests. Eliminates procurement risk on projects with mandatory API 670 clauses.
• DC-to-10 kHz Bandwidth: A single transducer simultaneously captures static position (DC), 1× and 2× running speed vibration, sub-synchronous instability (oil whirl, oil whip), and high-frequency events such as blade passing frequency on compressors — no additional sensors required for these measurement categories.
• Direct Drop-In Replacement: Identical mechanical envelope (M10 × 1.0 thread, 8 mm tip) and electrical interface to previous 3300 XL transducers. No bracket modification, no Proximitor reconfiguration, no System 1 database changes required for like-for-like replacement.
• Deterministic Scale Factor: The 7.87 V/mm (200 mV/mil) scale factor is a system-level specification. Monitoring systems (3500 rack, System 1) configured for this scale factor will read correctly with any 3300 XL transducer of the same suffix — critical for multi-train plants where spare management must be standardized.
• Extended Temperature Rating: The +177°C operating limit covers bearing pedestal temperatures on high-pressure steam turbines without requiring remote mounting or thermal isolation adapters, reducing installation complexity and potential signal path discontinuities.
• Field Diagnostic Transparency: The –24 VDC excitation and –1 to –18 VDC output range are measurable with a standard multimeter at the Proximitor terminal strip. Field engineers can verify transducer continuity, gap voltage, and cable integrity without specialized test equipment — a significant advantage during unplanned outages.
• Built-In Fault Detection: An open-circuit or short-circuit condition in the transducer cable drives the Proximitor output to its rail voltage, which monitoring systems interpret as a not-OK condition. This prevents a cable failure from being misread as a valid shaft position measurement.
• Standardized Spare Parts Inventory: The 3300 XL platform long production history means the 330104-02-08-05-01-00 is stocked by multiple qualified distributors globally. Plants can maintain a single spare unit covering multiple measurement points across different machines — reducing capital tied up in spare parts inventory.

Quality Assurance & Global Logistics

Genuine Bently Nevada Origin

Every 330104-02-08-05-01-00 unit supplied through siemensplc.com is sourced from verified supply channels with full traceability to Bently Nevada (Baker Hughes) manufacturing. Units are inspected upon receipt: visual examination of the tip, coil housing, cable jacket, and connector; dimensional verification of thread pitch and tip diameter; and continuity check of the coaxial cable shield and center conductor. No unit with evidence of tip damage, cable kinking, or connector corrosion is shipped.

Packaging & ESD Protection

Proximity transducers are sensitive to electrostatic discharge at the coil winding. All units are shipped in anti-static foam-lined cases with moisture barrier bags and desiccant packs. The tip is protected by a machined thread cap. The connector is covered with a dust cap. Outer packaging is double-walled corrugated carton rated for international air freight handling.

Export Documentation

Standard export documentation includes: commercial invoice, packing list, certificate of origin (China), and HS 854370 customs declaration. For projects requiring additional documentation — material test reports, certificate of conformance — these are prepared upon request prior to shipment. All documentation is provided in English.

Logistics from Xiamen, China

Shipments originate from our Xiamen warehouse. Standard service: DHL Express or FedEx International Priority, with typical transit times of 3–5 business days to Southeast Asia, 4–6 days to Europe and the Middle East, and 5–7 days to the Americas. For critical plant shutdowns with hard deadlines, same-day dispatch is available for orders confirmed before 14:00 CST. Tracking AWB is provided within 2 hours of dispatch.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.