Bently Nevada 330903-00-02-10-01-CN Proximity Probe – 3300 NSv Series

Bently Nevada 330903-00-02-10-01-CN: Eddy Current Proximity Probe for Continuous Shaft Displacement Monitoring

The Bently Nevada 330903-00-02-10-01-CN is a 5 mm eddy current proximity probe from the 3300 NSv (Non-contacting Vibration) platform — the most widely deployed API 670-compliant measurement chain in rotating machinery protection. This specific part number encodes a 3-meter armored extension cable, standard TNC-style connector, and CN environmental suffix, positioning it as the default field-replacement and OEM-specified probe for centrifugal compressors, steam turbines, and boiler feed pump trains operating in petrochemical, power generation, and offshore environments.

In a closed-loop machinery protection architecture, the proximity probe is the primary transducer responsible for converting mechanical shaft displacement into a proportional DC voltage signal. The 330903-00-02-10-01-CN operates on the eddy current principle: a high-frequency oscillator (typically 1.0 MHz) drives a coil wound at the probe tip, generating an electromagnetic field that penetrates the target shaft surface. As the conductive shaft moves radially, eddy currents induced in the shaft surface load the oscillator circuit, producing a voltage change of −200 mV/mil (−7.87 V/mm) across the linear measurement range of 10–90 mil (0.25–2.29 mm). This analog output feeds directly into the 3300 NSv Proximitor® Sensor, which conditions the signal and delivers a buffered output to the 3500 series monitoring rack for alarm and trip processing.

The probe’s 3-meter armored cable is a critical mechanical design element. The armor — a stainless steel braid over a PTFE-insulated coaxial core — provides both EMI shielding and resistance to hydraulic fluid, lubricating oil, and process chemical exposure. The cable’s characteristic impedance is matched to the Proximitor® driver circuit, ensuring signal integrity without impedance mismatch reflections that would corrupt the DC gap voltage reading. The CN suffix designates a connector configuration validated for the standard 3300 NSv signal chain without adapter hardware.

Real-time Stock & RFQ: [email protected] | WhatsApp: +86 18359268345

Technical Parameters

Hardware Logical Analysis

The 330903-00-02-10-01-CN probe tip houses a precision-wound coil embedded in a thermoplastic housing that is hermetically sealed against the 316 SS probe body. The coil geometry is tuned to produce a flat sensitivity curve across the full 10–90 mil linear range when loaded by a standard AISI 4140 steel target shaft. For non-standard target materials — such as Inconel 718 or titanium alloys used in aerospace-derivative compressors — a calibration correction factor must be applied at the Proximitor® sensor, as eddy current penetration depth and resistivity differ from the standard calibration target.

The armored cable assembly is not a passive conductor. The coaxial geometry maintains a controlled distributed capacitance and inductance per unit length, which forms part of the resonant tank circuit shared with the Proximitor® oscillator. Substituting a cable of different length or construction without recalibrating the Proximitor® will shift the oscillator operating point and introduce a systematic gap voltage error — a failure mode that is non-obvious during commissioning but produces drift in vibration baseline readings over time. The 3-meter length encoded in this part number is factory-matched to the Proximitor® calibration curve stored in the 3300 NSv sensor.

EMC performance is achieved through three parallel mechanisms: the stainless braid provides >40 dB shielding effectiveness against radiated RF interference from variable-frequency drives and high-voltage switchgear; the PTFE dielectric minimizes dielectric absorption that would otherwise introduce temperature-dependent signal drift; and the probe body’s direct metallic bond to the machine casing provides a low-impedance ground reference that suppresses common-mode noise on the signal return path. Together, these design elements allow the probe to maintain measurement accuracy in environments with conducted EMI levels up to 10 V/m, consistent with IEC 61000-4-3 Class III requirements.

System Integration Benefits

• Direct API 670 compliance: The probe, cable, and Proximitor® combination is certified as a complete measurement chain per API 670 4th Edition, eliminating the need for third-party validation during EPC project commissioning audits.
• Deterministic signal latency: The analog output path from probe tip to Proximitor® output has no digital conversion delay, ensuring that the 3500 rack receives a real-time displacement signal with group delay below 1 ms — critical for trip response time calculations in overspeed protection loops.
• Plug-compatible field replacement: The part number encodes all system-critical parameters (cable length, connector, environmental rating), allowing maintenance teams to replace probes without recalibrating the Proximitor® sensor, reducing planned maintenance window duration.
• Buffered output for parallel monitoring: The Proximitor® driven by this probe provides a buffered BNC output that can feed a portable data collector simultaneously with the 3500 rack, enabling online route-based data collection without interrupting protection system operation.
• Diagnostic transparency via gap voltage: The DC gap voltage output provides a continuous, measurable indicator of probe-to-shaft clearance. Trending this value over time allows predictive identification of probe fouling, shaft wear, or mounting bracket creep before vibration alarm thresholds are reached.
• Thermal stability across process extremes: The 316 SS probe body and PTFE cable insulation maintain dimensional and electrical stability from cryogenic LNG service (−35°C) to high-temperature steam turbine bearing housings (+177°C at the probe tip), without requiring probe derating or special mounting provisions.
• Zero mechanical loading on shaft: Non-contact measurement eliminates the tribological interaction between sensor and shaft that limits contact-type displacement transducers. There is no wear mechanism, no lubrication requirement, and no risk of probe-induced shaft scoring during startup transients.
• Interoperability with condition monitoring software: The standardized −200 mV/mil sensitivity and DC-coupled output are natively recognized by System 1® Evolution and third-party CMMS platforms, enabling direct import of vibration and position data without signal conditioning adapters.

Quality Assurance & Global Logistics

Every 330903-00-02-10-01-CN unit shipped from our Xiamen, China facility undergoes a structured incoming inspection protocol: part number label verification against the Bently Nevada manufacturer documentation, visual inspection of probe tip coil housing integrity, cable armor continuity check, and connector pin inspection. Units are stored in ESD-safe, humidity-controlled conditions to prevent coil oxidation and connector corrosion during transit.

Export documentation is prepared in compliance with Chinese customs regulations and destination-country import requirements, including commercial invoice, packing list, and country of origin certificate where required. Shipment is arranged via DHL Express, FedEx International Priority, or air freight consolidation depending on order volume and destination. Typical transit time to Southeast Asia is 3–5 business days; to the Middle East and Europe, 5–8 business days; to the Americas, 7–10 business days. All shipments are fully insured and tracked from dispatch to delivery confirmation.

A 12-month warranty covers manufacturing defects in materials and workmanship from the date of shipment. Warranty claims are processed with photographic documentation and, where applicable, return of the defective unit for inspection. Replacement units are dispatched within 5 business days of claim approval.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.

{
“@context”: “https://schema.org”,
“@graph”: [
{
“@type”: “Product”,
“name”: “Bently Nevada 330903-00-02-10-01-CN Proximity Probe”,
“description”: “Bently Nevada 330903-00-02-10-01-CN eddy current proximity probe, 3300 NSv series, 5mm tip, 3-meter armored cable, API 670 compliant. Non-contact shaft displacement measurement for rotating machinery protection.”,
“sku”: “330903-00-02-10-01-CN”,
“brand”: {“@type”: “Brand”, “name”: “Bently Nevada”},
“manufacturer”: {“@type”: “Organization”, “name”: “Bently Nevada”},
“category”: “Proximity Probe / Eddy Current Sensor”,
“offers”: {
“@type”: “Offer”,
“priceCurrency”: “USD”,
“availability”: “https://schema.org/InStock”,
“seller”: {“@type”: “Organization”, “name”: “siemensplc.com”}
}
}
]
}