Bently Nevada 330905-00-23-10-02-00 Proximity Probe – 3300 NSv Series

Bently Nevada 330905-00-23-10-02-00 — 3300 NSv Eddy-Current Proximity Probe for Critical Rotating Machinery Protection

The Bently Nevada 330905-00-23-10-02-00 is an 8 mm eddy-current proximity probe belonging to the 3300 NSv Proximity Transducer System, a matched-component platform engineered for continuous, non-contacting measurement of shaft radial vibration, axial position, and differential expansion in turbomachinery and other critical rotating assets. Within a machinery protection control loop, this probe functions as the primary sensing element: it converts the physical gap between its tip and the rotating shaft surface into a proportional DC voltage signal, which is then conditioned by the matched 3300 NSv Proximitor driver and fed into a Bently Nevada 3500-series monitor for alarm, trip, and trend evaluation. The probe’s role is deterministic — any drift in its output directly affects the accuracy of vibration amplitude readings and position setpoints, making component authenticity and calibration traceability non-negotiable in API 670-governed installations.

Real-time Stock & RFQ: [email protected] | WhatsApp: +86 18359268345

Technical Parameters

Hardware Logical Analysis

The 330905-00-23-10-02-00 operates on the principle of electromagnetic induction: a high-frequency oscillator within the matched Proximitor driver (typically 1.0 MHz carrier) drives an alternating magnetic field through the probe’s coil winding. When a conductive target enters the field, eddy currents are induced on the shaft surface, loading the oscillator circuit and reducing its amplitude. The Proximitor demodulates this amplitude change into a linear DC output voltage. The 3300 NSv system is factory-calibrated as a matched set — probe, extension cable, and driver — to achieve a guaranteed scale factor of 7.87 V/mm ±1% across the full linear range.

EMC Design: The probe body is constructed with a stainless-steel armored housing that provides mechanical protection and acts as an electrostatic shield, attenuating capacitively coupled interference from adjacent high-voltage cabling common in turbine control panels. The coaxial cable geometry maintains a controlled characteristic impedance, minimizing signal reflection and noise pickup over the cable run between probe and Proximitor.

Thermal Stability: The coil former material and winding geometry are selected to minimize temperature coefficient of sensitivity. Over the rated −35 °C to +177 °C range, sensitivity drift is controlled to maintain measurement integrity without field recalibration, which is critical in steam turbine bearing housings where ambient temperatures fluctuate significantly during startup and shutdown transients.

Matched-System Calibration Logic: The 3300 NSv architecture enforces a closed calibration chain. The probe’s coil impedance characteristics are matched to the Proximitor’s oscillator tuning. Substituting a non-NSv probe — even one with identical physical dimensions — shifts the oscillator operating point, altering the scale factor and zero-gap voltage. This is why the system is sold and certified as a matched set, and why OEM part authenticity directly affects measurement accuracy and API 670 compliance.

System Integration Benefits

• API 670 Compliance Out of the Box: The 330905-00-23-10-02-00 is designed and certified to meet API 670 requirements for radial vibration and position measurement, eliminating the need for additional compliance engineering when integrating into a 3500-series protection system.
• Deterministic Scale Factor: Factory-calibrated sensitivity of 7.87 V/mm ±1% ensures that the 3500 monitor’s alarm and trip setpoints map directly to physical displacement values without field adjustment, reducing commissioning time and eliminating calibration uncertainty.
• Plug-and-Play with 3500 Monitor Architecture: The probe’s output is directly compatible with Bently Nevada 3500/40M, 3500/42M, and 3500/45 position monitors, enabling straightforward channel configuration without custom scaling or signal conditioning hardware.
• Diagnostic Transparency: The DC output voltage provides a continuous, readable gap signal that maintenance engineers can monitor with a standard voltmeter to verify probe installation gap (typically −10 VDC at 1.0 mm gap), enabling rapid field verification without specialized test equipment.
• High-Temperature Operational Margin: Rated to +177 °C, the probe maintains specification in bearing housing environments where surface temperatures can exceed 120 °C during sustained full-load operation, providing a substantial thermal margin against nuisance failures.
• Minimal Maintenance Footprint: Non-contacting eddy-current technology eliminates mechanical wear, meaning the probe has no consumable components and does not require periodic replacement based on operating hours — only condition-based inspection of the cable and connector.
• Hazardous Area Certification: ATEX certification (zone classification per part number suffix) allows direct installation in classified hazardous areas without additional intrinsic safety barriers in supported configurations, simplifying the installation bill of materials.
• Backward Compatibility within 3300 NSv Platform: The probe is interchangeable with other 330905 series variants (differing cable lengths and connector options) within the same NSv driver system, allowing spare parts consolidation across multiple machine trains with different installation geometries.

Quality Assurance & Global Logistics

Every 330905-00-23-10-02-00 unit supplied through siemensplc.com is sourced from verified supply chains with full traceability documentation. Pre-shipment inspection includes visual examination of the probe tip, armored cable integrity, and connector condition. Certificate of Conformance (CoC) and original manufacturer datasheet are included with each order. The 12-month warranty covers manufacturing defects under normal operating conditions.

Logistics are managed from our warehouse in Xiamen, China, with DHL Express and FedEx International Priority as primary carriers. Standard export documentation — commercial invoice, packing list, HS code classification (HS 9031.80), and Certificate of Origin — is prepared for every international shipment. Typical transit time to major industrial hubs: 3–5 business days to Southeast Asia, 5–7 business days to Europe and the Middle East, 5–8 business days to North America. Urgent same-day dispatch is available for in-stock units when orders are confirmed before 14:00 CST.

Contact Information

📧 Email: [email protected]
💬 WhatsApp: +86 18359268345
🌐 Web: siemensplc.com
📍 Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.