Bosch Rexroth 0360-500-00 Hydraulic Control Module

Bosch Rexroth 0360-500-00 — Stop the Bleeding: Get Your Hydraulic System Back Online in Hours, Not Days

Your press line is down. The CNC machining center is locked out. The injection molding machine is cold. Every hour that hydraulic circuit stays offline, you’re burning through production targets, penalty clauses, and customer goodwill. The Bosch Rexroth 0360-500-00 Compact Module is the exact component standing between you and full production recovery — and we have it on the shelf in Xiamen, ready to move today.

This isn’t a catalog listing. This is a field-ready spare. The 0360-500-00 is a precision-engineered hydraulic control module from Rexroth’s Compact Module Series — a platform built for high-cycle, high-pressure industrial environments where failure is not an option. When your maintenance team pulls the failed unit and needs a verified replacement with zero re-engineering, this is the part. Same mounting footprint, same port configuration, same pressure ratings. Bolt it in, bleed the circuit, and restart.

We ship globally from Xiamen via DHL Express and FedEx International Priority. Most destinations in Europe, Southeast Asia, and the Middle East receive parts within 3–5 business days from order confirmation. For North America, allow 4–6 days. If your line is down right now, contact us directly — we can expedite same-day dispatch for orders confirmed before 14:00 CST.

URGENT REQUIREMENT? Contact: [email protected] | WhatsApp: +86 18359268345

Quick Technical Datasheet

Troubleshooting & Replacement Tips

Common Failure Signatures for the 0360-500-00:

In the field, this module typically presents failure in three patterns. First, internal bypass leakage — the actuator drifts under load, pressure holds momentarily then bleeds off. This points to worn spool seals or a scored bore inside the module body. Second, pressure spike / relief chatter — the system pressure oscillates erratically, often accompanied by audible valve chatter. This indicates contamination lodged in the relief valve seat or a fatigued spring. Third, complete loss of function — no actuator movement, pressure builds at pump but drops to zero at the work port. This is typically a seized spool or a cracked manifold passage, both of which are non-repairable in the field.

Replacement Procedure — Field Checklist:

1. Depressurize fully. Cycle the system to tank, confirm gauge reads zero, then lock out the power unit. Do not rely on the pressure gauge alone — crack the drain line fitting to verify.
2. Label every port connection before removal. The 0360-500-00 uses a sub-plate mounting interface. Photograph the port labeling on the existing unit before disconnecting any lines. Rexroth port designations (P, T, A, B, X, Y) must align exactly on reinstallation.
3. Inspect the sub-plate sealing face. Any scoring or corrosion on the sub-plate mating surface will cause immediate bypass leakage on the new module. Clean with a lint-free cloth and verify flatness with a straight edge before mounting.
4. Check O-ring condition. The module ships with new O-rings. Do not reuse the old ones regardless of visual condition. Lubricate lightly with clean hydraulic fluid before seating.
5. Torque the mounting bolts in a cross pattern. Rexroth specifies torque values on the module label or in the series datasheet. Over-torquing distorts the manifold body and causes internal leakage — a common post-replacement mistake.
6. Flush before full-load operation. After installation, run the system at low pressure (30–50 bar) for 5–10 minutes to flush any assembly debris through the return filter before applying full working pressure.
7. Verify pilot pressure if applicable. Some configurations of the Compact Module Series use external pilot (X port). Confirm pilot supply pressure meets the minimum threshold specified for your valve configuration — typically 10–15 bar minimum.

Contamination Note: The majority of premature failures in Rexroth Compact Modules trace back to ISO 4406 cleanliness levels exceeding 18/16/13. If you’re replacing a module that failed within 12 months of the last replacement, pull a fluid sample before commissioning the new unit. A contaminated system will destroy the replacement in weeks.

Reliability in Harsh Conditions

The Rexroth Compact Module Series was not designed for controlled laboratory environments. It was engineered for the reality of industrial floors — where ambient temperatures swing from pre-dawn cold starts to mid-shift heat soak, where vibration from adjacent presses and compressors is constant, and where hydraulic fluid cleanliness is never as good as the spec sheet assumes.

The 0360-500-00 housing is manufactured from high-grade ductile iron with precision-bored internal passages. The bore surface finish is held to Ra 0.4 µm or better, which directly determines spool seal life under cyclic pressure loading. The external surface treatment resists corrosion in humid and mildly aggressive atmospheres — relevant for coastal facilities, food processing environments, and tropical climates where surface rust on hydraulic components accelerates seal degradation.

Vibration resistance is inherent in the sub-plate mounting design. Unlike cartridge-style valves that can loosen under sustained vibration, the manifold-mounted configuration of the 0360-500-00 distributes mechanical stress across the full mounting face, eliminating the single-point failure mode of threaded cartridge bodies. In high-cycle press applications running 60+ strokes per minute, this design difference is the reason Rexroth Compact Modules outlast cartridge alternatives by a factor of two to three in service life.

Temperature performance is validated across the full operating range. The module maintains rated flow and pressure characteristics from cold-start conditions at -20°C fluid temperature through sustained operation at +80°C. For applications in steel mills, foundries, or outdoor mobile equipment in tropical regions, this thermal margin provides the headroom needed to handle process excursions without nuisance trips or seal failures.

Global Express Logistics

Our dispatch hub is located in Xiamen, Fujian Province — one of China’s primary export ports with direct access to DHL, FedEx, and UPS international gateway facilities. This geographic position gives us consistent transit times to major industrial hubs worldwide.

Typical Transit Times from Xiamen:

• Germany / Netherlands / UK: 3–4 business days via DHL Express or FedEx International Priority
• Singapore / Malaysia / Thailand: 2–3 business days via DHL Express
• UAE / Saudi Arabia: 3–4 business days via FedEx International Priority
• USA (East Coast): 4–5 business days via FedEx International Priority
• Australia / New Zealand: 4–5 business days via DHL Express
• India: 3–4 business days via DHL Express

Every shipment includes a commercial invoice, packing list, and HS code declaration pre-completed for customs clearance. For EU destinations, we provide EUR.1 movement certificates upon request. For US imports, we can provide USMCA documentation where applicable. All hydraulic components are packed in rigid outer cartons with internal foam cushioning — the module arrives at your facility in the same condition it left our warehouse.

For urgent orders, contact us directly via WhatsApp before placing your order. We will confirm real-time stock availability, provide a proforma invoice within 30 minutes, and coordinate same-day dispatch if your order is confirmed before 14:00 CST. Tracking numbers are provided within 2 hours of dispatch.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
© 2026 siemensplc.com. All rights reserved.