GE IC697MEM713 CMOS RAM Memory Module

IC697MEM713 Down? Every Minute of Downtime Costs You Money — We Ship Same Day

A failed CMOS RAM module on your GE Fanuc Series 90-70 rack doesn’t just halt a machine — it stops an entire production line. At $5,000–$50,000 per hour of unplanned downtime in most process and discrete manufacturing environments, the IC697MEM713 sitting on our shelf in Xiamen is not just a spare part. It’s your fastest path back to full output. We maintain verified stock of the IC697MEM713 specifically for emergency replacement scenarios. No waiting on OEM lead times. No broker uncertainty. Confirmed availability, same-day dispatch, DHL/FedEx express to your door.

URGENT REQUIREMENT? Contact: [email protected] | WhatsApp: +86 18359268345

Quick Technical Datasheet

Troubleshooting & Replacement Tips

After ten years of field work on Series 90-70 systems, these are the failure patterns and replacement pitfalls that catch engineers off guard:

Common Fault Indicators for IC697MEM713:

• CPU FAULT LED solid red on power-up: The CPU cannot read the memory module. First suspect is a failed or corrupted IC697MEM713. Reseat the module firmly — VME connectors oxidize in humid environments. If the fault persists after reseating, the module has failed.
• %SW1 (System Status Word) Bit 0 set: Memory parity error. This is a hard fault. The CMOS RAM has lost data integrity, typically caused by a depleted backup battery or a voltage transient during a power cycle. Do not attempt to clear and continue — replace the module.
• Program lost after power cycle: The lithium backup battery has failed. Battery life is 3–5 years under normal conditions, shorter in high-temperature environments above 45°C. Replace the battery (standard 3.6V lithium) or replace the entire module if the CMOS cells have been damaged by deep discharge.
• Intermittent CPU restarts under load: Marginal CMOS RAM — cells are failing under read/write stress. This will worsen. Schedule a planned replacement before it becomes an unplanned one.

Step-by-Step Replacement Procedure:

• Step 1 — Backup first: Use Logicmaster 90 or Proficy Machine Edition to upload the current ladder program to your programming device before touching anything. If the CPU is already faulted and cannot communicate, check if a backup copy exists on the CPU’s internal flash (IC697CPU788/789 models only).
• Step 2 — Power down the rack: Series 90-70 does not support hot-swap of memory modules. De-energize the rack completely. Verify with a meter — do not rely on the power supply LED alone.
• Step 3 — Remove the failed module: Loosen the two captive screws on the module faceplate. Pull the module straight out using the extraction levers. Avoid rocking — VME connectors are fragile when forced at an angle.
• Step 4 — Inspect the backplane connector: Check for bent pins or corrosion on the VME P1/P2 connectors. A damaged backplane connector will kill a new module within weeks.
• Step 5 — Install IC697MEM713: Seat the new module firmly until both extraction levers click. Tighten the captive screws finger-tight. Do not overtorque.
• Step 6 — Power up and download: Apply power. The CPU will fault immediately — this is expected, as the new CMOS RAM is blank. Download your backed-up program from the programming device. Perform a CPU STOP/RESET/START sequence via Logicmaster or PME.
• Step 7 — Verify I/O scan: Confirm all I/O modules are scanning correctly. Check %I and %Q reference tables. A fresh memory download resets all retentive data — verify setpoints, PID parameters, and recipe values before returning to production.

Configuration Notes:

• The IC697MEM713 has no DIP switches or jumpers. It is auto-addressed by the Series 90-70 backplane — no manual slot configuration required.
• If upgrading from IC697MEM713 to a higher-capacity module (e.g., IC697MEM715 or IC697MEM717), no hardware changes are needed. The CPU automatically detects the new capacity on the next power cycle.
• Firmware matching is not required for memory modules — the IC697MEM713 is firmware-agnostic across all Series 90-70 CPU revisions.

Reliability in Harsh Conditions

The Series 90-70 platform was engineered for the factory floor, not the server room. The IC697MEM713 reflects that design philosophy. The VME form factor provides inherent mechanical rigidity — the module is locked into the backplane at two connector points, making it significantly more vibration-resistant than card-edge designs used in lighter industrial controllers. In automotive stamping plants and compressor stations where vibration is constant, this matters.

The CMOS RAM cells themselves are rated for operation across the full 0°C to 60°C range, but the real-world limiting factor is the lithium backup battery. In ambient temperatures consistently above 45°C — common in poorly ventilated control cabinets in foundries or outdoor enclosures in tropical climates — battery life drops to 18–24 months. Plan your PM schedule accordingly. The module’s conformal coating provides protection against condensation and airborne contaminants, making it suitable for food processing environments and coastal installations where humidity and salt air are concerns. Units stocked at our Xiamen facility are stored in climate-controlled conditions with anti-static packaging maintained throughout the storage period.

Global Express Logistics

Our dispatch hub is located in Xiamen, Fujian Province — one of China’s primary export ports with direct DHL and FedEx service connections. Here’s how the process works from the moment you confirm your order:

• Order confirmation: We verify stock, issue a proforma invoice, and confirm the unit serial number within 2 hours of receiving your purchase order or payment confirmation.
• Same-day dispatch: Orders confirmed before 15:00 CST ship the same business day. Orders after 15:00 ship the following morning.
• Packaging: The IC697MEM713 is packed in anti-static foam within a double-wall corrugated carton. Fragile and ESD-sensitive labels are applied. The module is secured against movement — it will not shift in transit.
• Carrier selection: DHL Express and FedEx International Priority are our primary carriers. Transit times: Southeast Asia 1–2 days, Europe 2–3 days, North America 3–4 days, Middle East/Africa 3–5 days. We select the fastest available service for your destination automatically.
• Tracking: A tracking number is emailed within 1 hour of dispatch. We monitor shipments actively and will proactively contact you if any customs delay is detected.
• Documentation: Commercial invoice, packing list, and certificate of conformance are included with every shipment. Export classification and HS code documentation are prepared to minimize customs clearance time.

Contact Information

For urgent stock inquiries, technical questions, or bulk pricing on the IC697MEM713 and related Series 90-70 components:

• Email: [email protected]
• WhatsApp: +86 18359268345
• Web: siemensplc.com

© 2026 siemensplc.com. All rights reserved.