Weidmuller 8708680000 DIN Rail Power Supply

Weidmuller 8708680000 — Stop the Clock on Your Downtime. Ship Today.

Your line is down. Every minute costs money. The Weidmuller 8708680000 ConnectPower 24VDC DIN rail power supply is on the shelf in Xiamen right now. We’ve handled enough emergency callouts to know that sourcing delays kill margins faster than the fault itself. Skip the distributor queue — this unit ships same business day via DHL Express or FedEx International Priority.

The 8708680000 is the backbone of thousands of control panels across automotive, food processing, water treatment, and discrete manufacturing. When it fails, nothing downstream works — your PLCs lose rail voltage, your I/O modules go dark, and your HMI throws a cascade of alarms that take hours to clear even after power is restored. Get the right part, get it fast.

URGENT REQUIREMENT? Contact: [email protected] | WhatsApp: +86 18359268345

Quick Technical Datasheet

Troubleshooting & Replacement Tips

After ten years of field work, here’s what actually goes wrong with the 8708680000 and what to watch when you swap it out:

Common Failure Modes:

• No DC output, AC input confirmed: Internal fuse or inrush limiter failure. Do not attempt to bypass — replace the unit. Check upstream MCB rating; undersized breakers cause nuisance trips that stress the PSU’s input stage over time.
• Output voltage drift below 22 V DC: Capacitor aging on the secondary filter stage. Symptoms appear gradually — your PLCs start throwing low-voltage warnings (e.g., Siemens S7 SF LED flashing, Wago 750 series bus error). Measure output under full load before condemning the PSU.
• Intermittent output under high ambient temperature: Thermal derating kicks in above 40 °C. If your panel runs hot, check the derating curve — the 8708680000 may need forced ventilation or a higher-rated unit.
• Output OK but PLC won’t boot: Check output ripple with an oscilloscope. A failing PSU can have acceptable DC voltage but excessive ripple that corrupts PLC backplane communication.

Replacement Checklist — Do This Before You Power Up:

• Confirm replacement unit output current rating matches or exceeds original load budget. Add 20–25% headroom minimum.
• Verify DIN rail slot width — the 8708680000 occupies approximately 45 mm. Confirm panel space before ordering.
• Check output voltage trim pot position on the new unit. Factory default is 24.0 V; some applications require 24.5 V for long cable runs.
• Inspect terminal block wiring for corrosion or loose ferrules before reconnecting — a PSU swap is the right time to fix marginal connections.
• After power-up, measure output voltage under load before reconnecting PLC backplane. Confirm stable 24 V ±1% before releasing the line.
• Log the replacement in your maintenance record with date, ambient temperature, and measured output voltage. This data is invaluable for predicting the next failure.

No DIP switches or firmware matching required for the 8708680000 — it is a passive power supply with no addressable configuration. Plug-and-play replacement once wiring is verified.

Reliability in Harsh Conditions

The ConnectPower 8708680000 was engineered for environments that destroy consumer-grade hardware. Weidmuller’s design validation includes:

• Vibration resistance: Tested to IEC 60068-2-6 sinusoidal vibration profiles — relevant for press lines, compressor rooms, and mobile equipment panels where mechanical shock is constant.
• Thermal cycling: Qualified across -25 °C to +70 °C operating range with derating curve published for high-ambient installations. The unit handles cold-start in unheated outdoor enclosures without issue.
• Humidity and condensation: IP20 enclosure with conformal-coated PCB options in the ConnectPower range. For wash-down environments, pair with an IP65 enclosure — the PSU itself handles humidity up to 95% RH non-condensing.
• EMC immunity: Meets EN 61000-4 series for conducted and radiated immunity. Suitable for installations adjacent to variable frequency drives, contactors, and high-current switching loads without additional filtering in most cases.
• Surge protection: Built-in output overvoltage and short-circuit protection with automatic recovery. A shorted load will not destroy the unit — it folds back and recovers when the fault clears.

In practice, the 8708680000 outlasts the equipment it powers when installed correctly. The failures we see in the field are almost always thermal management issues or upstream power quality problems — not the PSU itself.

Global Express Logistics

We ship from our Xiamen warehouse, positioned specifically for fast international transit times to Southeast Asia, Europe, the Middle East, and the Americas.

• DHL Express Worldwide: Typical transit 2–4 business days to most destinations. Real-time tracking from pickup to delivery. Customs clearance handled with commercial invoice and packing list provided.
• FedEx International Priority: Available for time-critical shipments where DHL capacity is constrained. Same-day handover for orders confirmed before 14:00 CST.
• Export documentation: We provide commercial invoice, packing list, and certificate of origin on request. HS code 8504.40 applies to this product class — confirm with your customs broker for import duty calculation.
• Packaging: Anti-static bag, foam-lined carton, and outer corrugated box. Units arrive in the same condition they left — we’ve shipped to oil platforms, desert sites, and Arctic installations without damage claims.
• Bulk orders: For quantities above 5 units, contact us for consolidated shipping options and volume pricing. We can hold stock against a blanket order for MRO programs.

If your plant is down right now, send us a WhatsApp message — we respond within 15 minutes during business hours and can confirm stock and shipping schedule immediately.

Contact Information

📧 Email: [email protected]
📱 WhatsApp: +86 18359268345
🌐 Web: siemensplc.com
© 2026 siemensplc.com. All rights reserved.