Siemens PLC sourcing desk · Multi-brand automation spares [email protected] +86 18359268345
ABB In Stock OK

ABB YPK107E Axis Computer Board

Request verified availability, condition, replacement risk review, packing options and courier lead time for YPK107E.

Exact partYPK107E RFQ auto-fillPart number attached Export packingDHL / FedEx / UPS Sales replyEmail or WhatsApp
BrandABB Part NumberYPK107E ConditionAvailability Check Lead TimeRFQ Confirmation DocumentsDatasheet / photos by RFQ ShippingExport packing available
Auto-filled RFQ YPK107E

Click Request Quote and the part number is inserted into the inquiry form automatically.

Procurement Data

Key Product Information

Core fields for model confirmation and RFQ routing. Detailed product narrative remains below.

Brand
ABB
Primary Part Number
YPK107E
Product Type
Robot Controller Board
Series / Family
IRC5
Manufacturer
ABB Robotics
Country of Origin
SE
Catalog Category
Robotics & Motion
Operating Temp.
0 °C to +55 °C (cabinet ambient)
Warranty
12 months against manufacturing defects
Model confirmed for inquiry YPK107E Send quantity, destination and urgency. The RFQ form keeps this part number attached.
Request Quote
Product Overview

ABB YPK107E Axis Computer Board — Stop the Clock on Your IRC5 Downtime

Every minute an ABB IRC5 or S4C+ robot cell sits idle, the cost accumulates — missed production targets, idle labor, delayed shipments. The YPK107E axis computer board is the nerve center of ABB’s distributed motion-control architecture: when it fails, the entire robot arm stops. We stock the YPK107E in Xiamen and ship globally via DHL/FedEx express, so your line can be back online before the next shift.

URGENT REQUIREMENT? Contact: [email protected] | WhatsApp: +86 18359268345

Quick Technical Datasheet

Parameter Value
Part Number YPK107E
Manufacturer ABB Robotics
Board Function Axis Computer / Servo Axis Controller PCB
Compatible Controllers ABB IRC5 (single & multi-move), S4C+
Platform Series DSQC (Drive System Quality Control)
Bus Interface DSQC internal backplane high-speed bus
Operating Temperature 0 °C to +55 °C (cabinet ambient)
Supply Voltage +5 VDC / +24 VDC via backplane (controller-supplied)
Form Factor PCB module, MCU backplane slot
Weight Approx. 200 g
Country of Origin Sweden (OEM)
Warranty 12 months against manufacturing defects
Stock Status ✔ Ready to Ship — Xiamen, China
Certifications CE, RoHS

Troubleshooting & Replacement Tips

How to confirm the YPK107E has failed — not the drive or encoder:

Before pulling the board, isolate the fault systematically. The YPK107E generates axis computer communication faults surfaced on the FlexPendant. Key fault codes to watch:

  • Error 38xxx series — Axis computer communication fault. If this persists after a cold restart and cable re-seat, the YPK107E is the primary suspect.
  • Error 50xxx / joint calibration failure — Repeated calibration loss on a specific axis that does not resolve after resolver/encoder swap points to corrupted axis data on the YPK107E.
  • Axis-specific motion errors (non-drive-related) — If swapping the drive unit clears the drive fault but the axis still refuses to move, the axis computer board is the next swap candidate.

Step-by-step replacement procedure:

  1. Safety first — Set the IRC5 main switch to OFF and lock out/tag out. Wait 5 minutes for capacitors to discharge before opening the cabinet.
  2. Document current configuration — Note the RobotWare version (check the FlexPendant: ABB Menu → System Info) and the DSQC board revision label inside the cabinet door. The replacement YPK107E must match the hardware revision.
  3. No DIP switch setting required — The YPK107E uses automatic addressing via the DSQC backplane; there are no physical address switches to configure. The board self-identifies on power-up.
  4. Firmware compatibility — RobotWare 5.x and 6.x both support the YPK107E without a firmware re-flash in standard IRC5 configurations. If your controller runs RobotWare 4.x (S4C+), confirm the board revision suffix matches your existing unit.
  5. ESD precautions — Use a grounded wrist strap. The YPK107E contains CMOS logic susceptible to electrostatic discharge. Handle by the board edges only.
  6. Connector seating — Press the board firmly into the MCU backplane slot until the retention latch clicks. A partially seated board will generate intermittent bus errors that mimic other faults.
  7. First power-on check — After installation, power on and observe the FlexPendant boot sequence. The axis computer should enumerate within 30 seconds. If Error 38001 persists, re-seat the board and check backplane connector pins for damage.
  8. Axis calibration — After a board swap, perform a full axis calibration using the Calibration Pendulum or CalibWare. Calibration data is stored in the controller, not on the board, so existing calibration values should reload automatically — but verify each axis position against your reference marks.

Reliability in Harsh Conditions

The YPK107E is designed to operate continuously inside IRC5 and S4C+ cabinets — environments that are far from benign. ABB’s DSQC board design philosophy addresses three primary industrial stress vectors:

  • Vibration resistance — The PCB uses through-hole mounting for critical components and conformal coating on the solder side, preventing micro-crack propagation under the continuous low-frequency vibration generated by robot motion and factory floor machinery. Connector retention latches are mechanically locked to prevent vibration-induced unseating.
  • Thermal cycling — Industrial robot cabinets cycle between cold start-up and full-load operating temperatures repeatedly across a shift. The YPK107E’s component selection accounts for differential thermal expansion; ceramic capacitors and metal-film resistors in the signal path maintain parameter stability across the 0–55 °C operating range.
  • Electromagnetic interference (EMC) — The board operates in close proximity to high-current servo drive modules. ABB’s DSQC bus uses differential signaling with hardware-level CRC error checking, ensuring data integrity even in high-EMI cabinet environments. Ground planes on the PCB provide shielding for the axis computation logic.
  • Humidity and contamination — Conformal coating on the PCB surface provides a barrier against condensation and airborne particulates common in foundry, food processing, and automotive paint-shop environments.

Global Express Logistics

Our warehouse is located in Xiamen, Fujian Province — one of China’s primary export hubs with direct access to international freight lanes. Once your order is confirmed and payment cleared, the YPK107E ships the same business day (orders confirmed before 14:00 CST) or the next morning.

  • DHL Express Worldwide — Door-to-door delivery to Europe, North America, and Southeast Asia in 2–4 business days. Real-time tracking provided at dispatch.
  • FedEx International Priority — Available for US, Canada, and Mexico destinations. Typical transit: 2–3 business days from Xiamen.
  • Customs documentation — Commercial invoice, packing list, and HS code declaration (HS 8537.10 / 8473.30 as applicable) prepared for every shipment. ECCN classification available on request for US import compliance.
  • ESD-safe packaging — Anti-static bag, foam-lined carton, and fragile/electronic handling labels applied as standard. Humidity indicator card included inside the carton.
  • Insurance — Full declared-value cargo insurance available on request. Recommended for high-value single-unit shipments.
  • Emergency freight — For critical shutdowns, we can arrange same-day courier pickup and overnight freight to most major industrial regions. Contact us via WhatsApp for real-time coordination.

Contact Information

Email: [email protected]
WhatsApp: +86 18359268345
Web: siemensplc.com
Location: Xiamen, China
© 2026 siemensplc.com. All rights reserved.

Ready to quote

Send This Part Number to Sales

[email protected]
RFQ workflow

Confirmation Process

Quality workflow ->
01Model confirmation

We check the full part number, brand, series and visible nameplate information before quotation.

02Availability reply

Sales confirms stock path, condition option, quantity and realistic lead time for export dispatch.

03Packing & courier

DHL, FedEx, UPS or buyer courier arrangements can be reviewed with packing requirements.